Panasonic ESLV81 - Manual (Page 6)


Using the lock ring
Use the lock ring [D7] to lock or unlock the power switch
[D8].
Rotate the lock ring [D7] until it clicks.
Rotate the lock ring to “ ” to unlock the
power switch:
For when shaving, washing the shaver,
lubricating the shaver.
Rotate the lock ring to “ ” to lock the power
switch:
For when carrying the shaver.
Charge
Charging using the self‑cleaning recharger
Thoroughly wipe off any drops of water on or around the self‑
cleaning recharger so that it is dry before charging the shaver.
1 1
Insert the appliance plug [E=]
into the self‑cleaning recharger
[F].
2 2
Remove the protective cap [A]
and then attach the shaver.
3 3
Plug in the AC adaptor [E] into
a household outlet. 1
3 2
The “Charge” course starts when attaching the shaver.
Turn the shaver off before attaching.
Check that the outer foil is not deformed or damaged when
you are attaching the shaver.
Wipe off any water droplets on the main body rear terminal. •
•
•
•
You can charge even with the STATUS lamp of the self‑
cleaning recharger blinking.
Charging is completed after approx. 1 hour.
You can keep the shaver attached to the self‑cleaning
recharger, or connected to the AC adaptor, when not using it
to maintain full battery capacity. You cannot overcharge the
shaver.
Charging without the self‑cleaning recharger
You can also charge without the self‑cleaning recharger.
1 1
Insert the appliance plug [E=]
into the shaver.
2 2
Plug in the AC adaptor [E] into
a household outlet.
1
2
You cannot operate the shaver while charging.
•
•
ES-LV81_EU.indb 6 2011/02/16 14:34:02