Nilfisk-ALTO AMX-140 - Manual (Page 15)

LEFT RIGHT
MAIN MIX OUTPUT
(BAL/UNBAL)
14
4.25 MAIN MIX OUTPUT Connectors 34
Through the main mix level control, you can adjust the output level
from -
to +15dB.
34
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD
AVIS: RISQUE DE CHOC ELECTRIQUE - DO NOT OPEN
- NE PAS OUVRIR
SERIAL
MODEL
POWER
ON
OFF
RATED POWER CONSUMPTION: 25W
PHANTOM
18VAC~
35 2 36
- POWER ON/OFF Switch
This switch is used to turn the main power ON and OFF.
- PHANTOM ON/OFF Switch
This switch will apply +48 Volt Phantom Power only to the 5 XLR microphone inputs. Never connect microphones
when the phantom power is on already.
4.26 REAR PANEL Description
This connector is used to connect the supplied AC Adapter.
- AC INPUT Connector
35
2
36
The stereo output is supplied both with XLR and 1/4" TRS sockets,
which is used to send the audio signal to an amplifier.