Nilfisk-ALTO AMX-140 - Manual (Page 7)

6
3. READY TO START?
3.1 Please check the AC voltage available in your country before connecting your AMX-140(FX) to the AC socket.
3.2 Be sure that the main power switch is turned off before connecting the mixer to the AC socket. Also, you should
make sure that all Input and output controls are turned down. This will avoid damages to your speakers and avoid
excessive noise.
3.4 Before disconnecting the AMX-140(FX) always turn-off the power switch.
3.5 Do not use solvents to clean your AMX-140(FX). A dry and clean cloth will be OK.
3.3 Before turning on the AMX-140(FX) you shall connect it to a power amplifier and turn-on the mixer BEFORE the power
amplifier. Once you have finished your working session you shall turn the mixer off AFTER the power amplifier.