Nilfisk-ALTO AMX-140 - Manual (Page 19)

18
6. FOR THE EXPERTS WHO WANT TO KNOW MORE
As we have told you previously in this manual, the AUX SEND2 control both on mono and on stereo channels is factory
wired as POST-FADER. If you have some skill in electronic components soldering you can modify this setting and have
all your AUX SENDS configured as PRE-FADER.
Modification on mono and stereo channels
Before
Disconnect
the POST route
AUX
(PRE)
POST
After
AUX
(PRE)
POST
Solder the PRE route