Panasonic KXTG6672 - Manual (Page 30)

Note:
R Phone numbers from the 4 most recently edited
area codes are automatically edited.
R If you move to another area, you can turn this
feature off to erase previously edited area
codes. To use this feature again, turn it on and
reprogram the area codes you want to edit once
again.
Erasing selected caller information
Base unit / Handset
1 Proceed with the operation for your unit.
Base unit: MCIDN
Handset: MFN CID
2
MbN: Select the desired entry.
3 MERASEN (soft key) a MbN: “Yes” a
MSELECTN
4
Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Erasing all caller information
Base unit / Handset
1 Proceed with the operation for your unit.
Base unit: MCIDN
Handset: MFN CID
2 MERASEN (soft key) a MbN: “Yes” a
MSELECTN
3 Handset: MOFFN
Storing caller information to the
phonebook
Base unit
1 MCIDN
2 MbN: Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the desired format.
3 MSAVEN a MbN: “Yes” a MSELECTN
4 MnN (EXIT)
Note:
R If you stored caller information to the phonebook
using the base unit, the entry is automatically
assigned to group 1.
Handset
1 MFN CID
2 MbN: Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the desired format.
3 MSAVEN
4 MbN: “Phonebook” a MSELECTN
5 Continue from step 2, “Editing entries”,
page 18.
30 For assistance, please visit http://www.panasonic.com/help
Caller ID Service