Panasonic KXTG7742 - Manual (Page 17)

Initial settings
n Direct command code:
Programmable settings can be accessed
by pressing MMENUN, # and then the
corresponding code on the dial keypad
(page 33).
Example: Press MMENUN#101.
n Symbol meaning:
Symbol Meaning
Example:
MbN: “Off” Press MCN or MDN to select
the words in quotations.
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MSELECTN, then
proceed to step 2.
1
MMENUN#101
2
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2012
07 15 12
3
MOKN
4
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5
MAM/PMN: Select “AM” or “PM”.
6 MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
1
MMENUN#110
2 MbN: Select the desired setting. a
MSAVEN
3
MOFFN
Voice guidance language
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
1
MMENUN#112
2
MbN: Select the desired setting. a
MSAVEN
3 MOFFN
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1
MMENUN#120
2 MbN: Select the desired setting.
3
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help 17
Getting Started
TG7731_41_(en-en)_1121_ver.021.p17 17 2011/11/21 12:02:12