Answering calls, Useful features during a call, Answering calls useful features during a call – Panasonic KXTG7742 User Manual

Page 23

Advertising
background image

and/or PIN in the phonebook, a pause is also
needed (page 32).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:

1

9 a MPAUSEN

2

Dial the phone number. a M

N

Note:
R A 3.5 second pause is inserted each time

MPAUSEN is pressed.

Answering calls

When a call is being received, the ringer
indicator flashes rapidly.

1

Lift the handset and press M

N or M N

when the unit rings.
R To answer a cellular call, you can also

press MCELLN.

R You can also answer the call by

pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)

2

When you finish talking, press MOFFN or
place the handset on the base unit or
charger.

Auto talk

You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M

N. To turn this feature

on, see page 38.

Adjusting the handset ringer volume

n

While the handset is ringing for an
incoming call:

Press MjN or MkN repeatedly to select the
desired volume.

n

Programming the volume beforehand:

1

To change the cellular line ringer
volume:
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
MMENUN#160

2

MbN: Select the desired volume.

3

MSAVEN a MOFFN

Temporary handset ringer off

While the handset is ringing for a call, you can
turn the ringer off temporarily by pressing M

N.

Useful features during a

call

Hold

This feature allows you to put an outside call
on hold.

1

Press MMENUN during an outside call.

2

MbN: “Hold” a MSELECTN

3

To release hold on the cellular line:
Press MCELLN.
R Another handset user can take the call:

MCELLN

*1

a MSELECTN

*1 The call is taken when:

– only 1 cellular phone is

registered.

– the line is set to make cellular

calls (page 20).

R The base unit user can take the call by

pressing MCELL 1N or MCELL 2N.
(KX-TG7741 series: page 3)

To release hold on the landline:
Press M

N.

R Another handset user can take the call

by pressing M

N.

R The base unit user can take the call by

pressing MSP-PHONEN.
(KX-TG7741 series: page 3)

Note:
R If a call is kept on hold for more than 9

minutes, an alarm tone starts to sound and
the ringer indicator flashes rapidly. After 1
additional minute on hold, the call is
disconnected.

R If another phone is connected to the same

line, you can also take the call by lifting its
handset.

For assistance, please visit http://www.panasonic.com/help

23

Making/Answering Calls Using the Handset

TG7731_41_(en-en)_1121_ver.021.p23 23

2011/11/21 12:02:13

Advertising
This manual is related to the following products: