Panasonic KXTG7742 User Manual

Page 47

Advertising
background image

Using a Bluetooth wireless

headset (optional) for

landline calls

By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R 1 headset can be registered to the base

unit. However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.

R For best performance, we recommend

using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).

Registering a headset to the base
unit

Important:
R Make sure that the Bluetooth headset is not

connected to any other Bluetooth device.

1

Your headset:
Set your headset to registration mode.
R Refer to the headset operating

instructions.

2

Handset:
MMENUN#621

3

Enter your headset PIN.
R Typically, default PIN is “0000”. Refer

to the headset operating instructions.

4

Press MOKN, then wait until a long beep
sounds.

5

MOFFN
R When the HEADSET indicator on the

base unit lights green, you are ready to
use the headset.

Connecting/disconnecting a headset

If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.

To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.

Base unit

*1

*1 KX-TG7741 series: page 3

To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long beep
sounds.

Handset

1

To connect/disconnect:
MMENUN#622
R A long beep sounds.

2

MOFFN

Deregistering a headset

You can cancel a registration of the headset
that is stored to the base unit. See
“Deregistering Bluetooth devices”, page 21.

Operating a Bluetooth wireless
headset using a landline

Important:
R Refer to your headset operating instructions

for headset operations.

Answering landline calls with your
headset

To answer a landline call, turn on your
headset referring to your headset operating
instructions.

When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your

headset;
– press MnN (STOP) on the base unit.

(KX-TG7731 series: page 3)

For assistance, please visit http://www.panasonic.com/help

47

Using Bluetooth Devices

TG7731_41_(en-en)_1121_ver.021.p47 47

2011/11/21 12:02:14

Advertising
This manual is related to the following products: