Panasonic EY6409GQKW - Manual (Page 9)

— 9 —
V. ACCESSORIES
Use only bits suitable for size of drill’s chuck.
VI. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
VII. SPECIFICATIONS
MAIN UNIT
BATTERY PACK
BATTERY CHARGER
Note: This chart may include models that are not available in your area.
Please refer to the catalogue.
Model EY6405 EY6409 EY6432
Screw
driving
Machine screw M5 M5 M6
Wood screw ø 6.8 mm (17/64") ø 6.8 mm (17/64") ø 8 mm (5/16")
Self-drilling screw ø 6 mm (15/64") ø 6 mm (15/64") ø 6 mm (15/64")
Drilling
For Wood ø 27 mm (1-1/16") ø 27 mm (1-1/16") ø 36 mm (1-25/64")
For Metal ø 10 mm (3/8") ø 13 mm (1/2") ø 13 mm (1/2")
Model EY6405 EY6409 EY6432
Motor DC Motor 12 V DC Motor 15.6 V
No-load Speed
Low 400 / min (rpm.) 450 / min (rpm.)
High 1300 / min (rpm.) 1450 / min (rpm.)
Chuck Capacity
0.5 mm ~ 10 mm
(1/32" ~ 3/8") 1.0 mm ~ 13 mm
(1/16" ~ 1/2")
Max Torque
Low 22.5 Nm (230 kgf-cm, 199 in-lbs.) 31.9 Nm (325 kgf-cm, 282 in-lbs.)
High 6.3 Nm (65 kgf-cm, 56 in-lbs.) 8.8 Nm (90 kgf-cm, 78 in-lbs.)
Clutch Torque
Approx. 1.0 Nm (10 kgf-cm, 8.7 in-lbs.) ~
5.4 Nm (55 kgf-cm, 47.7 in-lbs.)
Approx. 1.0 Nm (10 kgf-cm, 8.7 in-lbs.) ~
6.9 Nm (70 kgf-cm, 61 in-lbs.)
Overall Length
202 mm
(7-61/64")
208 mm
(8-3/16")
Weight (With Battery Pack)
1.7 kg (3.75 lbs.)
with EY9106
1.8 kg (3.97 lbs.)
with EY9200
1.9 kg (4.19 lbs.)
with EY9201
2.0 kg (4.41 lbs.)
with EY9230
2.2 kg (4.85 lbs.)
with EY9231
2.0 kg (4.41 lbs.)
with EY9136
Model EY9106 EY9200 EY9201 EY9230 EY9231 EY9136
Storage Battery
Ni-Cd
Battery
Ni-MH
Battery
Ni-Cd
Battery
Battery Voltage 12 V DC (1.2 V x 10 cells) 15.6 V DC (1.2 V x 13 cells)
Model EY0110
Electrical rating See the rating plate on the bottom of the charger.
Weight 0.78 kg, (1.72 lbs.)
Charging Time
7.2 V 9.6 V 12 V 15.6 V 18 V 24 V
1.2Ah
EY9065, EY9066 EY9080, EY9086 EY9001, EY9006
1.7Ah
EY9180, EY9182 EY9101
2.0Ah
EY9168 EY9106 EY9136 EY9117
3.0Ah
EY9200 EY9230 EY9210
3.5Ah
EY9201 EY9231 EY9251
20min.
25min.
30min. 30min. 60min.
45min. 90min.
55min. 65min.
EY6405(EU).book Page 9 Wednesday, June 15, 2005 7:14 PM