Viii. electrical plug information, Only for u. k – Panasonic EY6409GQKW User Manual

Page 10

Advertising
background image

10

VIII. ELECTRICAL PLUG

INFORMATION

FOR YOUR SAFETY PLEASE READ
THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 3 amp fuse is fitted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a rat-

ing of 3 amp and that it is approved by

ASTA or BSI to BS1362.
Check for the ASTA mark

or the BSI

mark

on the body of the fuse.

If the plug contains a removable fuse cover

you must ensure that it is refitted when the

fuse is replaced.

If you lose the fuse cover the plug must not

be used until a replacement cover is

obtained.

A replacement fuse cover can be pur-

chased from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS

UNSUITABLE FOR THE SOCKET OUTLET

IN YOUR HOME THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG

CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELEC-

TRICAL SHOCK IF THE CUT OFF PLUG

IS INSERTED INTO ANY 13 AMP

SOCKET.

If a new plug is to be fitted please observe

the wiring code as shown below.

If in any doubt please consult a qualified

electrician.

IMPORTANT: The wires in this mains lead

are coloured in accordance

with the following code:

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead

of this appliance may not correspond with

the coloured markings identifying the termi-

nals in your plug, proceed as follows.

The wire which is coloured BLUE must be

connected to the terminal in the plug which

is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must

be connected to the terminal in the plug

which is marked with the letter L or coloured

RED.

Under no circumstances should either of

these wires be connected to the earth termi-

nal of the three pin plug, marked with the
letter E or the Earth Symbol

.

How to replace the fuse: Open the fuse

compartment with a screwdriver and replace

the fuse and fuse cover if it is removable.

ONLY FOR U. K.

This apparatus was produced to BS800.

Fuse Cover

Fuse Cover

EY6405(EU).book Page 10 Wednesday, June 15, 2005 7:14 PM

Advertising
This manual is related to the following products: