Panasonic KXTS730S User Manual
Quick guide, Kx-ts730, Connections
PQQW14728XA
F0305-2055
D
Please read the operating instructions for further details.
Connections
Note:
L
Use only the included Panasonic AC adaptor PQLV10 (9V/850 mA).
L
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L
The unit will not work during a power failure.
To disconnect the
interface cable, pull
out the cable while
pushing the tabs.
AC adaptor
Telephone
line cord
To single-line
telephone jack
(RJ11C)
To power outlet (120 V AC, 60 Hz)
Hooks
Interface cable
1
2
Bottom of the
interface box
Interface box
Fasten the
AC adaptor
cord.
Fasten the
interface cable.
Model No.
KX-TS730
Quick Guide
E-PQQW14728XA.fm 1 ページ ２００５年６月３日 金曜日 午前１０時４分
Document Outline
- Note:
- Note:
- 1 Press {ERASE} ({F2} key) during playback.
- 2 Press {SELECT} ({F3} key) at “Individual erase”.
- 1 Press {ERASE} ({F2} key) during playback.
- 2 Press {<} or {>} to select “All erase”.
- 3 Press {SELECT} ({F3} key).
- 1 Press {k} ({F3} key).
- 2 Press {ADD} ({F1} key).
- 3 Enter the name (max. 16 characters).
- 4 Press {SET}.
- 5 Enter the phone number (max. 32 digits).
- 6 Press {SET} or {SAVE} ({F3} key).
- 7 Press {STOP}.
- 1 Press {k} ({F3} key).
- 2 Press {<} or {>} to scroll the phonebook items.
- 3 Press {CALL} ({F1} key) or {s}.
- 1 Press {MENU} ({F2} key), then press {SELECT} ({F3} key) or {SET}.
- 2 Press {<} to search from the most recent call, or press {>} to search from the oldest call.
- 3 Press {CALL} ({F1} key) or {s}.
- 1 Press {MENU} ({F2} key), then press {#}.
- 2 Enter the desired feature code (shown below).
- 3 Enter the desired setting code (shown below).
- 4 Press {SAVE} ({F3} key).
- 5 Press {STOP} to exit programming mode.
- Model No. KX-TS730
- Quick Guide