1 press {menu} ({f2} key), then press, 2 enter the desired feature code (shown below), 3 enter the desired setting code (shown below) – Panasonic KXTS730S User Manual
Page 5: 4 press {save} ({f3} key), 5 press {stop} to exit programming mode, Programming via direct commands
–
5
–
Programming via direct commands
You can program most features using “direct commands”—special codes that take you
directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s sub-menus.
1
Press {MENU} ({F2} key), then press {#}.
2
Enter the desired feature code (shown below).
3
Enter the desired setting code (shown below).
L
This step may vary depending on the feature being programmed.
4
Press {SAVE} ({F3} key).
5
Press {STOP} to exit programming mode.
Direct commands chart
Feature
Feature code
Setting code
Ringer volume
{
1} {6} {0}
{
1}: Low
{
2}: Medium
{
3}: High
{
0}: Off
Ringer tone
{
1} {6} {1}
{
1}–{3}: Tone pattern 1–3
LCD contrast
{
1} {4} {5}
{
1}–{6}: Level 1–6
Key tone
{
1} {6} {5}
{
1}: On
{
0}: Off
Caller ID number auto edit
{
2} {1} {4}
{
1}: On
{
0}: Off
Set dial mode
{
1} {2} {0}
{
1}: Pulse
{
2}: Tone
Set flash time
{
1} {2} {1}
{
1}: 900 ms {2}: 700 ms
{
3}: 600 ms {4}: 400 ms
{
5}: 300 ms {6}: 250 ms
{
7}: 200 ms {8}: 160 ms
{
9}: 110 ms {0}: 100 ms
{*}
: 90 ms {#}: 80 ms
Change language
{
1} {1} {0}
{
1}: English {2}: Spanish
:
Enter direct No.
BACK
E-PQQW14728XA.fm 5 ページ ２００５年６月３日 金曜日 午前１０時４分