Panasonic DVDS1 User Manual
Page 7
RQTC0074
COAXIAL IN
STEP 1 Connection to a television
STEP 2 The remote control
Amplifier with a built-in
decoder or a decoder-amplifier
combination
Coaxial cable
Enjoying multi-channel surround sound
n
Change “DOWN SAMPLING”, “DOLBY DIGITAL” and “DTS”
(è
page 14, “AUDIO” tab).
Connect the AC power supply cord last
n
Conserving power
This unit consumes a small amount of power, even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
Batteries
n
Insert so the poles (4 and 3) match those in the remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the
fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in
a cool, dark place.
Use
Aim at the remote control sensor (è page 8), avoiding obstacles, at a maximum range
of 7 m (23 feet) directly in front of the unit.
•
•
•
•
•
•
•
•
n
AC power supply cord (included)
To household AC outlet
Connection to a television/The remote control
AC IN
R6/LR6, AA