AT&T E5633 - Manual (Page 12)

10
Getting Started
Install the line cord as
shown in the diagram.
Clip wall-mount bracket
securely into notches on
underside of base.
Plug telephone line
cord into telephone jack.
Connect cords as shown on page 8, then press and slide down
firmly so base is held securely on outlet mounting pegs.
Plug power cord
transformer into
electrical outlet.
Wall mounting
The base can be installed on any standard wall-phone outlet as shown below. Choose
a location away from electronic equipment such as personal computers, television sets
or microwave ovens. Avoid excessive heat, cold, dust or moisture.
10
91-000343-060-000-E5630 manual Jan 13,2006.qxd 2/13/1950 7:21 PM Page 10