Panasonic KXTGD224 - Manual (Page 36)

Note:
R If the handset still indicate there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
1
Lead the telephone line cord through the
hole in the wall mounting adaptor in the
direction of the arrow.
2
Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
1 Hooks
A
B
1
3 Insert the hooks on the wall mounting
adaptor into holes
1 and 2 on the base
unit.
1 2
1
2
4
Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
5
Mount the unit on a wall then slide down
to secure in place.
R This product is compliant with the
following wall phone plate sizes (2
types).
1 83 mm (3 1 / 4 inches)
2 102 mm (4 inches)
36 For assistance, please visit http://www.panasonic.com/help
Useful Information
TGD2xx_(en_en)_1209_ver.040.pdf 36 2013/12/09 10:59:20