Panasonic KXTGD224 - Manual (Page 40)

Problem Cause/solution
I fully charged the batteries, but
–
still flashes,
– is displayed, or
– the operating time seems to
be shorter.
R Clean the battery ends ( , ) and the charge contacts
with a dry cloth and charge again.
R It is time to replace the batteries (page 10).
Making/answering calls, intercom
Problem Cause/solution
is displayed. R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 27).
Noise is heard, sound cuts in
and out. R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset does not ring. R The ringer volume is turned off. Adjust the ringer volume
(page 15, 22).
R Silent mode is turned on. Turn it off (page 25).
The base unit does not ring. R The ringer volume is turned off. Adjust the ringer volume
(page 15).
I cannot make a call. R The dialing mode may be set incorrectly. Change the
setting (page 14).
I cannot make long distance
calls. R Make sure that you have long distance service.
40 For assistance, please visit http://www.panasonic.com/help
Useful Information
TGD2xx_(en_en)_1209_ver.040.pdf 40 2013/12/09 10:59:20