Voice mail service – Panasonic KX-TS880W User Manual

Page 27

Advertising
background image

27

For assistance, please visit http://www.panasonic.com/help

Voice mail service

Voice mail is an automatic answering
service offered by your service
provider/telephone company. After
you subscribe to this service, your
service provider/telephone company’s
voice mail system answers calls for
you when you are unavailable to
answer the phone or when your line is
busy. Messages are recorded by your
service provider/telephone company,
not your telephone. Please contact
your service provider/telephone
company for details of this service.

Listening to voice mail
message(s)

The unit lets you know that you have
new voice mail messages in the
following way:

s

Voice mail

” is displayed.

1

Lift the handset or press
{

SP-PHONE

}

and dial an access

phone number.

s You will get an access phone

number from your telephone
company.

2

Follow the pre-recorded
instructions.

3

Press {

SP-PHONE

}

if using the

speakerphone.

s “Voice mail” will disappear from

the display.

s If “Voice mail” still display after

you have listened to your voice mail
messages, press {

PROGRAM/

EXIT

}

, and then press and hold

{

CLEAR

}

and “Voice mail” will

disappear.

Voice mail (VM) tone
detection

Your service provider/telephone
company sends special signals
(sometimes called “voice mail tones”
or “stutter tones”) to the unit to let you
know you have new voice mail
messages. If you hear a series of dial
tones followed by a continuous dial
tone after lifting the handset, you have
new voice mail messages. Soon after
you hang up a call or after the phone
stops ringing, your unit checks the
phone line to see if new voice mail
messages have been recorded.
Turn this feature off when:

s You do not subscribe to voice mail

service.

s Your service provider/telephone

company does not send voice mail
tones.

s Your phone is connected to a PBX. If you

are not sure which setting is required,
contact your service provider/telephone
company.

Turning VM tone detection
on/off

The default setting is “On”.

1

{

PROGRAM/EXIT

}

2

{

4} / {3}: “Program ?

> {

OK

}

3

{

4} / {3}: “VM tone detect ?

> {

OK

}

4

{

4} / {3}: Select the desired

mode

> {

OK

}

5

{

PROGRAM/EXIT

}

Voice Mail Service

KX-TS880.book Page 27 Friday, October 15, 2010 5:04 PM

Advertising
This manual is related to the following products: