Panasonic KX-TS880W - Manual (Page 33)

33
Useful Information
For assistance, please visit http://www.panasonic.com/help
Caller information is not
displayed. ≥ You need to subscribe to Caller ID service.
Consult your service provider/telephone
company for details.
≥ Install or replace the batteries.
≥ If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, plug the unit directly
into the wall jack.
≥ If you use a DSL /ADSL service, we recommend
connecting a DSL /ADSL filter between the unit
and the telephone line jack. Contact your DSL /
ADSL provider for details.
≥ The name display service may not be available in
some areas. Contact your service provider/
telephone company for details.
≥ Other telephone equipment may be interfering
with your phone. Disconnect it and try again.
Number of missed calls does
not display during standby
mode. ≥ You have entered the caller list before and there
is no new missed call coming in after that.
If there are unviewed missed calls, number of
missed calls will be displayed when you enter the
caller list.
You cannot store a name and
phone number in memory. ≥ Programming is not possible when:
s the handset is off the cradle.
s “
” is displayed.
s “ W ” is displayed.
≥ Check that the batteries are installed in the unit
and the battery power is not low.
≥ Do not pause for over 60 seconds while storing.
≥ Do not enter a phone number more than 32 digits
long.
≥ When using the call restriction feature (page 22),
you cannot store emergency numbers (#).
≥ If “Phonebook full” is displayed, erase other
stored items from the phonebook memory
(page 19).
The caller list/incoming phone
numbers are not edited
automatically. ≥ The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 20).
≥ You need to call back the edited number to
activate Caller ID number auto edit.
You cannot dial the phone
number edited in the caller list. ≥ The phone number you dialed might have been
edited incorrectly (for example, the long distance
“1” or the area code is missing). Edit the phone
number with another pattern (page 24).
Problem Cause/solution
KX-TS880.book Page 33 Friday, October 15, 2010 5:04 PM