ARRI ARRIFLEX 235 - Manual (Page 117)

117 117
White Level - Setting the Brightness of the Format Markings
The brightness of the format markings can be set to black
(0), dark gray (1), and light gray (2) or white (3).
• Move the cursor > with the keys Ê and Ë to the line
– WHITE LINE. Pressing the key Í will switch the settings
from 0 to 1 to 2 to 3 and back to 0, pressing the key Ì
will switch the settings in the opposite direction.
Outside - Darkening the Area outside of the Format Markings
This function is only available if one format marking
is activated. No darkening function is available if
there is no format marking or if two format markings
are switched on.
The brightness of the area outside of one format marking
can be reduced electronically to emphasize the important
image area.
• Move the cursor > with the keys Ê and Ë to the line
– OUTSIDE. Pressing the key Í will switch from no
shading (VID), light shading (LIGHT), dark shading
(DARK) to BLACK and back to VID. Pressing the key Ì
will give opposite direction.
MENU FORMAT MARKING
- FORMAT 1&2
- POSITION 1 Ö
- POSITION 1 Ü
- POSITION 2 Ö
- POSITION 2 Ü
-> - WHITE LEVEL 2
OUTSIDE LIGHT
- EXIT
MENU FORMAT MARKING
- FORMAT 1
- POSITION 1 Ö
- POSITION 1 Ü
POSITION 2 Ö
POSITION 2 Ü
- WHITE LEVEL 2
-> - OUTSIDE LIGHT
- EXIT
Video-Assist-System