ARRI ARRIFLEX 235 - Manual (Page 30)

30 30
6.1 Loading the Shoulder Magazine
Loading the magazine should be practised in daylight
with a piece of test film until the procedure can also be
carried out confidently in a darkroom or film changing
bag.
Cutting the film through the middle of the perforation
holes simplifies the loading process considerably. The
ARRI Film Cutting Gauge ➪ photo simplifies cutting in
the darkroom.
The following steps should be carried out in a darkroom
or film changing bag!
• Remove the loop protector and lay the magazine on a
flat surface with its cover facing upwards.
• To open the cover, depress the safety catch, flip up the
locking grip and turn it counter-clockwise ➪
photo .
• Lift up the magazine cover and remove it by pulling the
cover to the left.
film cutting gauge locking grip
safety catch
Magazines