ARRI ARRIFLEX 235 - Manual (Page 139)

139 139
External Synchronization Unit ESU-1
The external synchronization unit ESU-1
➪
photo can be
used with the ARRIFLEX 235 as well as with the 435 models,
535, 535B and 16SR 3/Advanced. It allows synchronization
of the camera to other equipment such as TV monitors. By
means of a BNC-socket, it is possible to synchronize to an
external standard video signal (50/60 Hz) or, through an
inductive pickup, to a computer or video monitor. The camera
display shows “ESU” in the upper line. The ESU-1 can be
used for frame rates from 3 to 60 fps.
The frame rate is indicated on the camera display in
Mode 2. A phase shifter and a pilottone generator have
also been integrated into the external synchronization
unit. The synchronization is retained even when the
camera is switched off.
See TECHN. INFORMATION “External Synchronization
Unit ESU-1”.
• To connect the ESU cable to the camera, the 235
accessory expansion cable KC-88-s (K2.55011.0) has
to be connected to the camera’s remote socket. The
ESU cable is then connected to the accessory expansion
cable. The RCU-1 can be connected to the other socket
of the accessory expansion cable.
Accessories