Preparations before using remote operation, L 44 – Panasonic HX-A500H User Manual
Page 44
- 44 -
Preparations before using remote operation
1
Install the smartphone application “Image App” on your smartphone. (
2
Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the “Image App”.
≥ This operation is not possible while this unit is recording.
Proceed to “Using remote operation with a direct connection ([Smartphone Direct Connect])”.
1
Check if the wireless access point is compatible with IEEE802.11b/g/n.
2
Set up a Wi-Fi connection between this unit and the wireless access point.
*
≥ Searching for wireless access points to set up a connection (
≥ Setting up a connection manually (
)
* This operation is not possible while this unit is recording.
When the Wi-Fi connection is complete, proceed to “Using remote operation with a wireless access
point connection ([Wireless Network Mode])”. (
Using remote operation with a direct connection
([Smartphone Direct Connect])
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to on.
1
Start up the smartphone application “Image App”.
2
Touch the smartphone on
of this unit.
≥ Touch the NFC mark while a message asking you to touch the NFC
mark on the device is displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, the
message is displayed on the screen of this unit. Select [YES], press
the joystick, and then touch the smartphone on
of this unit again.
≥ If the unit is not recognized even when touching the smartphone,
change positions and try again.
≥ You cannot set up a connection when recording an image with this unit
or the menu screen is displayed.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
Setting up a direct Wi-Fi connection between this unit and a
smartphone
Setting up a Wi-Fi connection via a wireless access point