Panasonic HX-A500H User Manual
Page 65
- 65 -
The Wi-Fi connection is
not possible between this
unit and a smartphone.
(Wireless Access Point Connection)
≥ Make sure the smartphone is properly connected to the
wireless access point by checking the Wi-Fi settings of the
smartphone.
≥ Make sure this unit and the smartphone are connected to the
same wireless access point.
≥ Make sure the wireless access point is registered in this unit.
(Direct Connection)
≥ Make sure the smartphone is properly connected to this unit
by checking the Wi-Fi settings of the smartphone.
≥ Make sure the SSID and Password have been correctly input.
≥ Make sure the smartphone is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone’s Wi-Fi
set up.
It takes long time every
time to connect to a
smartphone.
≥ It may take longer time to connect depending on the Wi-Fi
connection setting of the smartphone, but it is not a
malfunction.
This unit is not displayed
in the Wi-Fi setting screen
of the smartphone.
≥ Try turning on/off the Wi-Fi function in the Wi-Fi settings on
the smartphone.
The Wi-Fi connection is
disconnected immediately.
≥ If there is a setting for avoiding poor connections in the Wi-Fi
setting menu of the Android device 4.0 or later version, turn it
off.
While this unit is
connecting in [Wireless
Network Mode], the
“Image App” fails to find
this unit.
≥ Shut down the “Image App”, then turn off the Wi-Fi mode of
this unit. After that, set the [Wi-Fi MODE] to the [Wireless
Network Mode] again, connect this unit and the smartphone,
then start up the “Image App”.
Cannot be connected
using NFC.
≥ Make sure your smartphone is compatible with NFC. This unit
can be used with NFC-compatible terminals via Android (OS
version 2.3.3 or later).
≥ Make sure the NFC function of your smartphone is on.
≥ Make sure this unit is turned on.
≥ Some smartphones cannot be easily checked simply by
touching. If this unit is not recognized even after touching,
change positions and try again by touching slowly.
≥ Touch again if it does not connect after touch.
If a connection still cannot be established, shut down the
“Image App”, turn off this unit and try to establish a
connection again.
≥ If the amount of time this unit is in contact with the
smartphone is too short, this unit may not recognize the
smartphone. Touch and hold the smartphone.
Problem
Check points