Messages, About recovery, L 82 – Panasonic HX-A500H User Manual

Page 82

Advertising
background image

- 82 -

Major confirmation/error messages to be indicated on the screen in text.

About recovery

If faulty management information is found, the messages may appear and a repair is performed.
(Repairing may take time depending on the error.)

≥ Use a sufficiently charged battery.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ If recovery fails, it will not be possible to play back files recorded before the unit turned off.
≥ When data recorded on another device is recovered, it may not be possible to play back the data

on this unit or the other device.

≥ If recovery fails, turn the unit off and on again after waiting a while. If recovery fails repeatedly,

format a media on the unit. Please be aware that if a media is formatted, then all the data
recorded on the media will be erased.

Others

Messages

CHECK CARD.

This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on an
microSD card, the card may be unstable. Reinsert the microSD card, then turn the unit off and
then on again.

No wireless access point found

≥ Check the Wi-Fi set up of your wireless access point and smartphone.
≥ [WPS Connection] can establish a connection only between two devices: this unit and a

device that will connect to this unit. Check if multiple devices are trying to establish a
connection in the WPS waiting state simultaneously.

≥ Read page

64

if the Wi-Fi connection cannot be established.

Connection failed. Please check network settings of connected device.

≥ It may be impossible to connect from some Web services such as “LUMIX CLUB” and

USTREAM. Try to reconnect after waiting a short while.

≥ Read page

64

if the Wi-Fi connection cannot be established.

Network disconnected.

≥ When using [Wireless Network Mode], if you do not operate the DLNA-compatible device you

are connected to for a while, it will be displayed. Check the status of the DLNA device you are
connected to.

Advertising