Sound adjustment, Clock and timer – Panasonic SC-HC38 User Manual

Page 10

Advertising
background image

10

RQT9742

Sound adjustment

The following sound effects can be added to the
audio output.

1

Press [SOUND] repeatedly to select the effect.

2

Press [3, 4] to select the setting and then
press [OK].

*1: This function can also be selected with the [D.BASS]

button on the unit.

≥ You may experience a reduction in sound quality when

these effects are used with some sources. If this occurs,
turn the sound effects off.

Clock and Timer

This is a 12-hour clock.

1

Press [SETUP] repeatedly to select “CLOCK”.

2

Press [3, 4] to set the time and then press
[OK].

≥ To display the clock, press [SETUP] to select “CLOCK”

and then press [OK] once. The time is displayed for 10
seconds.
(During standby, press [DISPLAY] once.)

≥ The clock is reset when there is a power failure or when

the AC power supply cord is removed.

≥ Reset the clock regularly to maintain accuracy.

*1: “CD”, “IPOD_DOCK”, “IPOD_PORT” and “FM” can be

set as the music source.

You can set the timer so this unit turns on at a
certain time every day.
Preparation
Set the clock (l left).

Setting the timer

1

Press [SETUP] repeatedly to select
“TIMER ADJ”.

2

Press [3, 4] to set the starting time
(“ON TIME”) and then press [OK].

3

Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].

Turn the timer on

1

Select the music source*

1

and set the desired

volume.

2

Press [SETUP] repeatedly to select
“TIMER SET”.

3

Press [3, 4] to select “SET” and then press
[OK].

≥ “

F” is displayed.

≥ To turn the timer off, select “OFF”.

4

Press [Í] to turn the unit off.

≥ To display the timer settings, press [SETUP] repeatedly

to select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if
the timer is turned on.

≥ During standby, if the timer is turned on, press

[DISPLAY] twice to display the settings.

≥ This unit can be used as normal after the timer is set,

however:
– Turn the unit to standby mode before the timer start

time.

– Even if the audio source or the volume is changed, the

timer will still use the audio source and volume that
was set when the timer was turned on.

The sleep timer can turn the unit off after a set time.

1

Press [SETUP] to select “SLEEP”.

2

Press [3, 4] to set the time (in minutes) and
then press [OK].

“SLEEP 30”

,.

“SLEEP 60”

,.

“SLEEP 90”

,.

“SLEEP 120”

^----------------------.

OFF (Cancel)

(----------------------J

≥ The remaining time is indicated on the unit’s display

except when other operations are performed.

≥ The play timer and sleep timer can be used together.

The sleep timer always has priority.

Direct-Vocal
Surround
(D.SURROUND)

“LEVEL 1”, “LEVEL 2” or
“OFF”.

≥ The factory preset is “OFF”.

Preset EQ
(PRESET EQ)

“HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).

≥ The factory preset is “HEAVY”.

Bass (BASS) or
Treble (TREBLE)

Adjust the level (j4 to i4).

Dynamic Bass*

1

(D.BASS)

“ON D.BASS” or
“OFF D.BASS”.

≥ The factory preset is

“ON D.BASS”.

Setting the clock

Play timer

Sleep timer

SC-HC38~RQT9742.book Page 10 Tuesday, December 11, 2012 2:20 PM

Advertising