Panasonic SC-HC38 User Manual
Page 17
17
RQT9742
EN
GL
IS
H
3
Attach the wall mount bracket to the wall with
2 screws (not supplied). (Both sides)
≥ Use a spirit level to ensure both wall mount brackets
are level.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
4
Fix the safety holder onto the unit with the
screw (supplied).
{.
Screw tightening torque: 50 N0cm (0.4 lbf0ft) to
70 N0cm (0.5 lbf0ft).
5
Attach the fall prevention cord (not supplied) to
this unit.
≥ Use a cord that is capable of supporting over 33 kg
(72.8 lbs) (with a diameter of about 1.5 mm (
1
/
16
q)).
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the FM antenna and the AC power supply
cord to the unit before hanging the unit onto the
wall. (
l
5)
≥ After hanging the unit, release your hands carefully
to confirm the unit sits securely on the wall.
7
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
≥ Refer to step 3 for requirements before screwing.
8
Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
≥ Make sure that the slack of the cord is minimal.
At least 30 mm (1
3
/
16
q)
‰7.5 mm (
19
/
64
q)
to
‰9.4 mm (
3
/
8
q)
‰4 mm
(
5
/
32
q)
Wall mount bracket
Screw
(supplied)
Cord (not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the
wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC38~RQT9742.book Page 17 Tuesday, December 11, 2012 2:20 PM