Taking pictures with your favorite settings, Program ae mode), Set the mode dial to – Panasonic DMC-FZ1000 User Manual

Page 31

Advertising
background image

31

Recording Modes

(ENG) SQT0196

Taking Pictures with Your Favorite Settings

(Program AE Mode)

Recording Mode:

The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.

1

Set the mode dial to [

].

2

Press the shutter button halfway and display
the aperture value and shutter speed value
on the screen.

If the exposure is not adequate when the shutter button
is pressed halfway, the aperture value and shutter speed
turn red and blink.

3

While the values are displayed (about 10 seconds), perform the
Program Shift by rotating the rear dial.

It will switch between Program Shift operation and Exposure Compensation operation
(P44) every time the rear dial is pressed while the values are displayed.

The Program Shift indication

A

appears on the screen.

To cancel Program Shift, turn the camera off or rotate the rear dial until the Program
Shift indication disappears.

Displaying/not displaying the exposure meter

>

[Custom]

> [Expo.Meter] > [ON]/[OFF]

When [Expo.Meter] is set to [ON], the exposure meter B will
be displayed when performing Program Shift, setting the
aperture value or adjusting the shutter speed.

Unsuitable areas of the range are displayed in red.

When the exposure meter is not displayed, switch the display
information for screen by pressing [DISP.]. (P24)

The exposure meter disappears after approximately 4 seconds
if no operation is performed.

60

60

60

4.0

4.0

4.0

2

00

SS

SS

SS

F

F

0

98

98

98

250

15

4.0

5.6

30

60

125

2.8

8.0

A

MENU

60

60

60

4.0

4.0

4.0

2

00

SS

SS

SS

F

F

0

98

98

98

250

15

4.0

5.6

30

60

125

2.8

8.0

B

DMC-FZ1000_PPC_eng.book 31 ページ 2014年5月30日 金曜日 午後5時9分

Advertising