Playing back pictures on a tv screen – Panasonic DMC-FZ1000 User Manual
Page 65
65
Others
(ENG) SQT0196
Playing Back Pictures on a TV Screen
•
Confirm the terminals on your TV and use a cable compatible with the terminals.
Image quality may vary with the connected terminals.
1
Connect the camera and a TV.
2
Turn on the TV and select the input to match the connector in use.
Preparations:
Turn this unit and the TV off.
•
Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged
in obliquely or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
To connect with an HDMI micro cable
•
Use a “High Speed HDMI micro cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI micro cable” [Type D–Type A plug, up to 2 m (6.6 feet) long]
•
Check the [HDMI Mode (Play)].
•
During 24p motion picture playback, please set [HDMI Mode (Play)] to [AUTO].
For settings other than [AUTO], it cannot output at 24 frames/second.
•
Audio will be played back as stereo (2ch).
•
No picture is displayed on the screen of this unit.
•
When [VIERA Link] is set to [ON], operations using the buttons on the camera are restricted.
A Align the marks, and insert.
B HDMI micro cable
C HDMI socket
To connect with an AV cable (optional)
•
Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
•
Audio will be played back in monaural.
D Align the marks, and insert.
E AV cable (optional)
F [AV OUT/DIGITAL] terminal
•
The color of the terminal is gold.
G Yellow: to the video input socket
H White: to the audio input socket
DMC-FZ1000_PPC_eng.book 65 ページ ２０１４年５月３０日 金曜日 午後５時９分