Multi expo, Application (record) – Panasonic DMC-LX7K User Manual

Page 140

Advertising
background image

Application (Record)

Using the [Rec] menu

- 140 -

VQT4J11

•For the setting procedures of the menu.

(→25)

[Multi Expo.]

You can combine two or three still pictures into a single picture.

■

Settings

[Start]

Start taking pictures.

Decide on your composition and take the first picture

Press to select [Next] and then press [MENU/SET]

•[Retake]: Delete the result of the last shot and take another picture.

•[Exit]: Exit Multi Exposure and save the picture that was taken.

Take the second and third pictures

•When you press [MENU/SET] while taking pictures, the pictures that

you took are saved and Multi Exposure is closed.

Use cursor button to select [Exit] and press [MENU/SET]

[Auto Gain]

[ON]: Combines several pictures into one by automatically adjusting the

brightness in accordance with the number of pictures taken.

[OFF]: Combines several pictures into one by simply overlapping the

exposure results of all pictures, as is.

Since this setting may create a combined picture that is too bright

for some subject brightness level, perform Exposure Compensation

if required.

●

Still pictures are not saved in memory until Multi Exposure is ended.

●

Information for the picture taken last will be used as recording information of pictures

taken using Multi Exposure.

●

The picture size setting will be fixed at the point at which you select [Start].

●

The zoom position and White Balance are fixed at the point at which you take the first

picture.

●

There are some restrictions on the functions, for example, you will not be able to use

the following functions.

•[Burst Shooting]

•[i.Dynamic]

•[Auto Bracket]

•[Aspect Bracket]

•[WB Bracket]

Advertising