Panasonic DMC-LX7K - Manual (Page 148)

Application (Record)
Using the [Rec] menu
- 148 -
VQT4J11
●
Pictures taken using interval recording cannot be stored in the built-in memory.
●
The interval recording function is not intended for application-specific systems
(monitoring cameras).
●
If you leave the camera unattended during interval recording, make sure that the
camera is not stolen.
●
Exercise caution when you perform interval recording for a long period of time in cold
regions or in a low-temperature or high-temperature/high-humidity environment, since
such use could cause malfunctions.
●
There is a possibility of the camera moving when it automatically turns on or off, for
example, when the lens is retracting into the camera housing. We recommend fixing
the camera to a tripod or using other methods on a stable surface when you take
pictures using interval recording. Make sure that the camera does not topple over
because of wind or other causes.
●
This function cannot be used for recording motion pictures.
●
Use a fully charged battery.
●
Interval recording will be interrupted and the setting will be canceled in the following
cases.
•When the remaining battery power runs out
•When the maximum number of pictures that can be recorded has been reached
●
Do not connect the AV cable (optional), HDMI mini cable (optional), and USB
connection cable during interval recording.