Panasonic FV-08VF2 - Manual (Page 10)

10
(1) To install the ventilating fan, follow the procedures described in lnstallation . Take the following
precautions before installation.
II
1. Installation in existing construction.
Installing the ventilating fan in an existing building requires an accessible area (attic or crawl space) above
the planning installation location or existing ducting and wiring.
CAUTION:
Check area above planning installation location to be sure that:
1. Duct work can be installed and that area is sufficient for proper ventilation.
2. Wiring can be run to planning location.
3. No wiring or other obstructions shall interfere with installation.
INSTALLATION IN EXISTING CONST UCTION VI (
R )
INSTALLATION IN EXISTING CONST UCTION VI (
R )
(2) Inspect duct work and wiring before proceeding with installation.
(3) Plan suitable location for ventilating fan. (next to ceiling joist)
(5) First, remove ceiling section according to Fig. 6 of page 5.
(6) Install ventilating fan.
(4) Before installation, provide inspection and maintenance access at a location that will not interfere
with installation work shown in installation . II
(1) Inspect duct work and wiring before proceeding with installation.
(2) Remove ceiling section according to Fig. 6 of page 5.
(3) Install ventilating fan.
2. Installation from accessible area above fan location.
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only. No service information is provided for customers.
Your product is designed and manufactured to ensure a minimum of maintenance. However, should your
unit ever require service, a nationwide system of factory service centers and AUTHORIZED INDEPENDENT
SERVICE CENTERS is maintained to support your product's warranty.
(In the U.S.A.,call 1-866-292-7292 to Customer call center.)
P ODUCT SE VICE
R R
P ODUCT SE VICE
R R