Panasonic FV-08VF2 - Manual (Page 6)

6
INSTALLATION JOIST MOUNTING- II II
( )
INSTALLATION JOIST MOUNTING- II II
( )
1. Remove adaptor from fan body before starting
installation.
2. Insert the suspension bracket into the adaptor and
secure it to joists by using long screws (ST4.2X20)
(Fig. 7)
Keep the distance B (7/8 inch, 21.6mm) for the
thickness of ceiling board.
3. Follow step 5 to 7 of the Installation (page 5) to
complete the duct work and wiring.
I
If spacing A between joists is 21 1/4 to 23 1/2
inches, connect suspension bracket
and
(C4 mark to C4 mark) according to page 4
Select the suspension bracket according to
spacing A as shown below.
II III
suspension
bracket suspension
bracket
I
suspension
bracket
III
suspension
bracket
& II III
Spacing A
between Joists
inches (mm)
13 1/4~15 1/2
( 336~394 )
16 1/2~18 3/4
( 419~480 )
21 1/4~23 1/2
( 540~597 )
4. Insert to fan body
(refering to step 2 of Installation , page 4)
the suspension bracket in
I
Make sure that adaptor claws are properly inserted
into fan body slots.
IMPORTANT:
5. Insert the fan body into joists. (Fig. 8)
2 Long screws
(ST4.2X20)
B
A
7/8 (21.6)
13 1/4~15 1/2 ( 336~394 )
16 1/2~18 3/4 ( 419~480 )
21 1/4~23 1/2 ( 540~597 )
Adaptor
Slots
Adaptor
claws
Fan body
Joist
Conduit
Junction box cover
Duct
Duct tape
2 Long screws
(ST4.2X20)
Adaptor
Fig. 7
Fig. 8
Joists
inches mm ( )