Panasonic DMC-G6KK - Manual (Page 214)

214
Motion Picture
1
Start recording by pressing the motion
picture button.
A Elapsed recording time
B Available recording time
• Recording of motion picture appropriate for each mode is
possible.
• The recording state indicator (red) C will flash while
recording motion pictures.
• If approximately 1 minute elapses without an operation
being performed, part of the display will disappear. Press
[DISP.] or touch the monitor to make the display
reappear.
• When recording a motion picture, do not cover the
microphone with your fingers or other objects.
• Release the motion picture button right after you press it.
2
Stop the recording by pressing the motion picture button again.
• Still picture recording is also possible during the motion picture recording by fully
pressing the shutter button.
(P216)
Recording Motion Picture
Enabling/disabling the motion picture button
[MENU] > [Custom]>[Video Button]>[ON]/[OFF]
• This function is for preventing accidental operation of the button.
Switching between the angle of view for taking pictures and the one for
recording motion pictures
[MENU] > [Custom]>[Rec Area]>[!] (Picture)/[ ] (Motion picture)
• When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording. When [Rec Area] is set to [
], angle of
view during motion picture recording is displayed.
• The recording area indicated is a guide line.
R 1 m 37 37 s R 1 m 37 s
3 s 3 s 3 s
C
B
A
DMC-G6PDF-VQT4Z78_eng.book 214 ページ ２０１３年４月２５日 木曜日 午前１０時５分