P251) – Panasonic DMC-G6KK User Manual
Page 251
251
Wi-Fi/NFC
Using the NFC “Near Field Communication” function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
1
Launch “Image App” on your smartphone/tablet.
•
The screen for selecting the connection destination is displayed after the launch.
2
While [
] is displayed on the connection screen of the “Image App”, touch
the smartphone/tablet to [
] of this unit.
•
It may take time to complete the connection.
•
When the smartphone/tablet has connected, an image of this
camera
will be displayed on
the smartphone/tablet.
•
If a connection attempt by touching fails, restart the “Image App”, and then display the
screen in step
1
again.
•
If a connection is established during single picture playback, the picture will be transferred
to the smartphone/tablet.
Connecting to a smartphone/tablet by using the NFC function
∫
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer
to the operating instructions of your device.
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a
compatible model.
•
Turn on the Wi-Fi function.
•
Install the “Image App” in advance.
DMC-G6PDF-VQT4Z78_eng.book 251 ページ ２０１３年４月２５日 木曜日 午前１０時５分