Panasonic DMC-G6KK - Manual (Page 59)

59
Preparation
• Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
• To turn the monitor/viewfinder on again, press any button or touch the monitor.
• When the eye sensor automatic switching (P66) is activated, [Auto LVF/Monitor Off] is
canceled.
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– [Multi Exp.]
• When using the AC adaptor (optional), [Sleep Mode] is disabled.
• When using the AC adaptor (optional), [Auto LVF/Monitor Off] is fixed to [5MIN.].
[Economy]
You can conserve the battery life by setting these menus.
Also, it will turn off the monitor/viewfinder automatically when not
in use to prevent discharge of the battery.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto LVF/Monitor Off]:
The monitor/viewfinder is automatically turned off if the camera
has not been used for the time selected on the setting.
[5MIN.]/[2MIN.]/[1MIN.]
[USB Mode]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{
[PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z
[PC]:
Set after or before connecting to a PC.
DMC-G6PDF-VQT4Z78_eng.book 59 ページ ２０１３年４月２５日 木曜日 午前１０時５分