AT&T TL74308 - Manual (Page 18)

13
Getting started
Belt clip & optional headset
To attach the
belt clip:
Snap the belt clip
into the retaining
tabs on both sides
of the handset as
shown in the figure.
To remove the belt
clip:
Gently lift either of the
belt clip retaining tabs,
shown in the figure,
outwards to remove
the belt clip from the
handset.
Plug a 2.5 mm
headset into the
jack on the side
of the handset.
Lift the rubber
flap here.
Left side of handset.
For handsfree headset conversations, use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm
headset. To purchase a headset, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
. In Canada, dial
1 (866) 288-4268
.