AT&T TL74308 - Manual (Page 22)

Basic operation
Handset locator
The handset locator feature is useful if you misplace
a handset.
To start the paging tone:
• Press
HANDSET LOCATOR/INTERCOM on the
telephone base. This starts the paging tone at
the handset(s) for 60 seconds to help you locate
the handset(s).
NOTE: When paging, if you press OFF/
CLEAR
or
MUTE/
REMOVE
on a handset, the ringer of the handset
will be silent but the handset locator feature will not
be cancelled.
To stop the paging tone:
• Press
PHONE
/FLASH,
SPEAKER
,
or any dial
pad key (0-9, *, or #) on the handset(s).
–OR–
• Press
HANDSET LOCATOR/INTERCOM on the
telephone base.
NOTE: The handset ringer volume also determines the
level of the paging tone. If the handset ringer volume
level is set to off, that handset will be silent for all calls
and paging (page 26).
Telephone operation
17
**PAGING**