ALESIS QS8.1 - Manual (Page 72)

Part 6: Editing Effects
66 QS7.1/QS8.1 Reference Manual
H
OW
T
HE
D
ISPLAY
C
HANGES
W
HEN
Y
OU
A
LTER
A
N
E
FFECT
Whenever you enter on of the Edit modes, the word EDIT appears in the lower left
portion of the display. Once you have actually changed something, that indicator
changes to read EDITED.
This is a handy reminder, telling you that there is now a difference between what’s in
the edit buffer and what is stored in memory for the selected Program (which is
where the Effect Patch resides).
S
TORING
E
FFECT
P
ATCHES
I
N
P
ROGRAM
M
ODE
Effects are part of Programs. Because of this, when you store a Program you
automatically store its Effect along with it. Here’s how.
• While in Effects Edit mode, press [STORE].
• To store the edited Program (along with Effect) into its original location,
replacing what was there before, simply press [STORE] again.
• To store the edited Program and Effect into a different location, use the [00] –
[120] and [0] – [9] buttons to select a Program number from 000 – 127 in the User
Bank.
• If you want to store this edited Program somewhere other than the User Bank,
you’ll need to have an appropriate RAMcard inserted into one of the two back
panel [PCMCIA EXPANSION CARD] slots. The storage procedure is the same,
except that you use the [BANK] buttons to jump from the User Bank to a bank on
a RAMcard.
• In all three cases, when you are ready to save your Program and Effect, simply
press [STORE] again and it will be done.
S
TORING
E
FFECT
P
ATCHES IN
M
IX
M
ODE
As we said earlier, when your QS is in Mix Mode or Mix Edit Mode, the Effect Patch
is that of the Program number assigned to the Effect Channel. Storing the Mix will
save this number, but will not store any changes you may have made to the Effect
Patch itself.