Panasonic DMWFL500E - Manual (Page 16)

16
VQT0Z62
Push the [MODE] button, and select the flash
mode. (P13)
≥ The optimum camera to subject distance and
guide number (GN) matching the digital camera
settings are shown on the display panel.
A: Optimum camera to subject distance
1 Turn the [GN/ISO] dial and set the
guide number (GN) so that the
camera to subject distance is set
to the distance the subject.
≥ The [F] dial can also be used for this
setting.
≥ If the optimum camera to subject distance
is closer than 0.6 m (or 0.5 m for close-up
photos), the lighting range of the flash will
shift. In this case, the user is warned by
the flashing of the number on the display.
≥ The optimum camera to subject distance
changes depending on the digital camera
settings (ISO sensitivity, aperture, focal
length and shutter speed).
2 Push the shutter button all the
way down, and take the photo.
≥ If the ISO sensitivity is [100], the optimum
camera to subject distance can be calculated
by dividing the guide number (GN) by the
aperture. (P31)
[MANUAL]
A
GN/ISO
VQT0Z62.book 16 ページ ２００６年６月２２日 木曜日 午前１１時４６分