Panasonic DMWFL500E User Manual

Page 25

Advertising
background image

25

VQT0Z62

≥ When the camera to subject distance is 0.5 m

to 1.5 m, the light emitted from the flash will be
skewed. For this reason, while holding down
the bounce unlock button, point the flash head
downward (7 degrees), and then take the
picture.

Point the flash head down as far
as it will go (7 degrees
downward).

≥ [

] appears on the display panel.

≥ Vignetting may be caused by the light from the

flash when the lens has a long overall length or
a large diameter. Take a test photo first, and
then take the picture.

≥ Use the flash in this way only for close-up

photos. If you keep the flash head pointed
down during regular photo taking, the light
emitted from the flash at the top of the screen
will be insufficient.

≥ The lighting angle can be adjusted manually.

Push the [ZOOM] button, and
select the lighting angle.

A: Lighting angle
≥ [M ZOOM] appears on the display panel.

Any of the following ZOOM settings can be
selected:

Each time the [ZOOM] button is pushed, the
settings are selected in the following sequence:

≥ [AUTO ZOOM] can be used only when a digital

camera with communication functions is used.

≥ When the wide panel is used,

any of the following settings can be selected:
[AUTO ZOOM], [10 (20)] or [8 (16)].

≥ When a value higher than the focal length of

the lens used is selected, the edges of the
images will darken.

Taking pictures at close range

Selecting the lighting angle manually

12 mm, 14 mm, 17 mm, 25 mm, 35 mm, 42 mm

[With a 135 camera (35 mm film conversion):

24 mm, 28 mm, 35 mm, 50 mm, 70 mm, 85 mm]

ZOOM

A

AUTO
ZOOM

12
(24)

14
(28)

25
(50)

17
(35)

35
(70)

42
(85)

VQT0Z62.book 25 ページ 2006年6月22日 木曜日 午前11時46分

Advertising