Panasonic -eng - Manual (Page 107)

107
When using Windows 98SE/Me/2000
Follow these steps to use CD-R recording software to create audio CDs.
Audio CDs recorded this way can be played in typical stereos with CD players.
Make sure your CD-R recording software supports the WAVE formats
described on page 38.
Open the WAV conversion window and select the sound files to record on
the audio CD.
You can check the capacity on the status bar.
Be careful not to exceed the maximum capacity on the CD-R/RW disk.
Click .
The <Convert to WAVE format> screen appears.
Select the WAVE format as confirmed in step and
click
.
The selected sound files are converted to WAVE files.
Use the CD-R recording software to write the sound files (as converted into
WAVE files) to the CD-R/RW disk.
For details on the CD-R recording software, refer to the software operating instructions.
Creating Audio CDs