Panasonic -eng - Manual (Page 90)

90
Recording
In step , you can switch between sound sources in the <Recording Source> dialog box to select the one that
is appropriate.
You can record up to 2 hours.
You may be unable to record for two hours depending on the amount of available space on the hard disk.
To save a recorded sound file.
Click the [Save] button.
It is converted to a sound file and saved.
Click in the <Simple Recorder> screen.
The <Save Sound file> dialog box appears.
Set the destination to save the file to.
You can switch the IC recorder, drive and
subfolder.
You can also create a new folder using the
[Create Fol.] button.
Input the file title.
Input “Side A” and “Side B”.
Select “Codec” and “Mode”.
You can make the recording stop automatically after a set period
has elapsed.
Click in the <Simple Recorder> screen to display the <Simple
Recorder Properties> dialog box. Place a check in “Recording will
stop after the specified time.”, then set the time that recording will
automatically be stopped.