Panasonic -eng - Manual (Page 48)

48
Continued on next page
You can cut/copy and paste waveforms to edit a file.
Select the sound file.
Click .
The <Sound File Waveforms> screen appears.
Slider File title Current position Total play time of the file
Time axis
Sound level
Time of the Start point
Time of the End point
Length of the selected section
If stereo WAVE format files are selected, both left and right side sound waveforms are displayed.
Each sound waveform can be individually edited.
If you click on either the L or R button it will switch to OFF ( , ). You cannot edit the side of the sound
waveform set to OFF.
You can use waveforms to edit both VM1 and WAVE files.
You cannot use waveforms to edit files still in an IC recorder.
You can also open the <Sound File Waveforms> screen by selecting “Display Sound Waveforms” from the [Edit]
menu.
Waveforms of sound files up to 3 hours can be edited. To edit waveforms of longer sound files, divide the files so
that none of the resulting files exceeds 3 hours. ( “Dividing files”, page 45).
Editing with sound file waveforms
Right channel
Left channel