Panasonic SC-PM500 - Manual (Page 6)

E
N
G
L
IS
H
ENGLISH
RQT9537
6
6
Discs
Playing discs
1 Press [x, OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
Press [x, OPEN/CLOSE] again to close the disc tray.
2 Press [CD] and then press [4/9] to start playback.
Stop playback Press [8] during playback.
Pause playback Press [4/9] during playback.
Press again to continue playback.
Skip album Press [R, T].
Skip track Press [2] or [6] (main unit:
[2/3] or [5/6]).
Search through
track Press and hold [3] or [5]
(main unit: [2/3] or [5/6]).
Repeat playback
You can repeat “Program playback” or other selected
“Playmode function”.
1 Press [PLAY MENU] to select “REPEAT”.
2 Press [Y, U] to select “ON REPEAT” and then
press [OK].
“
” is shown.
To cancel, select “OFF REPEAT”.
Playmode function
1 Press [PLAY MENU] to select “PLAYMODE”.
2 Press [Y, U] and then press [OK] to select the
desired mode.
OFF
PLAYMODE Play all tracks.
1-TRACK
1TR
Play one selected track on the disc.
Press the numeric buttons to select the
track.
1-ALBUM
1ALBUM
Play one selected album on the disc.
Press [R, T] to select the album.
RANDOM
RND
Play a disc randomly.
1- ALBUM
RANDOM
1ALBUM RND
Play all tracks in one selected album
randomly.
Press [R, T] to select the album.
Note:
• During random playback, you cannot skip to tracks which
have been played or press the numeric buttons.
• This function does not work with “Program playback”.
• The setting returns to the default “OFF PLAYMODE”
when you open the disc tray.
Viewing available information
You can view the available information on the display panel.
Press [DISPLAY].
Note:
• Maximum characters that can be shown:
approximately 16
• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
• Text data that the system does not support can show
differently.
Program playback
This function allows you to program up to 24 tracks.
1 Press [PROGRAM] in the stop mode.
“PGM” is shown.
2 Press the numeric buttons to select the desired
track.
Do this step again to program other tracks.
3 Press [4/9] to start playback.
1 Press [PROGRAM] in the stop mode.
2 Press [R, T] to select the desired album.
3 Press [6] and then press the numeric buttons to
select the desired track.
4 Press [OK].
Do steps 2 through 4 again to program other tracks.
5 Press [4/9] to start playback.
Cancel
program mode Press [PROGRAM] in the stop mode.
Replay the
program Press [PROGRAM] and then press
[4/9].
Check program
contents Press [2] or [6] when “PGM” is
shown in the stop mode.
To check while programming, press
[PROGRAM] two times after “PGM” is
shown, then press [2] or [6].
Clear the last
track Press [DEL] in the stop mode.
Clear all
programmed
tracks Press [8] in the stop mode. “CLR ALL”
is shown. Within 5 seconds, press [8]
again.
Note:
The program memory is cleared when you open the disc
tray.
PM500_EP_1gb.indd 6 PM500_EP_1gb.indd 6 5/10/2011 11:21:39 AM 5/10/2011 11:21:39 AM