Panasonic -eng User Manual
Page 23
23
Recording on discs and SD cards in high definition (Simply Create BD/DVD/SD Card (AVCHD))
Basic operations
4
Click and select the optical disc or SD
card to record on.
5
Click [Start writing].
This button is not available unless you have selected at least
one item.
●
6
Click [OK] when the confirmation
message is displayed.
If you click [Cancel], the previous window is displayed.
Recording now begins, and the status is shown in the
progress indicator.
With media other than DVD-R/RW and BD-R discs, recording
can be stopped by clicking [Cancel]. With DVD-R/RW and BD-R
discs, recording can be stopped by clicking [Cancel] when
changing discs or during data conversion. However, recording
cannot be stopped when data is being written.
It takes time to record all the data. Do not operate the computer
until recording is finished.
Content that does not fit on a single disc will be split and
recorded over multiple discs. The approximate number of discs
needed is indicated (
B
). Follow the instructions displayed to
switch to a new disc.
During multi-disc recording, you can stop recording when it is
time to load the second or subsequent disc. Information about
the remaining content will be displayed then. To record the
remaining content later, refer to this information and select the
content again, and then resume recording.
If a media problem causes recording to fail, follow the instructions
to replace the media. The content you were recording when the
failure occurred will be recorded again on the new media.
●
●
●
●
●
●
7
Click [OK] when a message is displayed
indicating that recording is complete.
Content on storage media or on your computer can also
be recorded to an optical disc or SD card
In step
2
, select inserted media or a folder on your computer
instead of your video camera.
Data cannot be imported between the same kinds of media,
such as from one disc to another or from one SD card to
another.
Different media cannot be used to record to a single media.
●
●
Tip
When content is recorded to storage media, playback may be
interrupted a few seconds between scenes.
Digital photos cannot be recorded with this function. To record photos
(“Recording photos”
When creating media of relay recorded video content continuously
recorded on different memory (e.g. hard disk or SD cards) with
compliant video cameras, only video content in the memory selected
at the time of connection is imported.
For further details on recording to various media
●
●
●
●
B