NewAir Portaible Air Conditioner AC-12100E - Manual (Page 11)

10
INSTALLATION INSTRUCTIONS (optional)
Installation in a double-hung sash
window
1. Cut the foam seal (adhesive type) to the proper
length and attach it to the window stool. Fig.10
2. Attach the window slider kit to the window stool.
Adjust the length of the window slider kit according
to the width of window; shorten the adjustable window
kit if the width of window is less than 22.1 inches.
Open the window sash and place the window slider
kit on the window stool. Fig.11
3. Cut the foam seal (adhesive type) to the proper
length and attach it on the top of the window. Shown
as in Fig.12.
4. Close the window sash securely against the
window.
5. Cut the foam seal to an appropriate length and
seal the open gap between the top window sash
and outer window sash. Shown as in Fig.13.
Foam seal A
(adhesive type)
Window kit
Window stool
22.1 ~ 38.6
Foam seal
Fig.10
Fig.11
Fig.12
Fig.13
Window kit
Window stool
Window kit
Window stool
or
Window kit
Window stool
or
22.1 ~ 38.6