NewAir Portaible Air Conditioner AC-12100E - Manual (Page 13)

12
INSTALLATION INSTRUCTIONS (optional)
Exhaust hose installation:
The exhaust hose and adaptor must be installed or removed
in accordance with the usage mode.
The duct can be compressed or extended moderately
according to the installation requirements, but it is
desirable to keep the duct length to a minimum.
1. Install the window exhaust adaptor B onto the exhaust
hose as shown in Fig.18a. or Fig.18b. Refer to the previous
pages for window kit installation.
2. Place the exhaust hose over against the air outlet opening
hook (See Fig.19) and flat the other end (See Fig.20) for
quick installation.
IMPORTANT:
DO NOT OVER BEND THE DUCT (SEE Fig. 22)
Fig.18b
Fig.19
Fig.20
Fig.22
The exhaust hose can be installed into the wall
(Not applicable to the units without adaptor A, expansion
plugs and wooden screws of Accessories ) .
1. Prepare a hole in an outside wall. Install the wall exhaust
adaptor A in the hole using the 4 expansion plugs and wooden
screws. Be sure to affix securely. (See Fig.21)
2. Attach the exhaust hose to wall exhaustadaptor A.
Fig.21
max 47.24 inches
min11.81 inches
Adaptor A
Expansion plug
position
Adaptor
cap
Note:
Cover the hole using the adaptor cap when not in use.
Pus
h in
Hook
Fig.18a
COOL,HEAT(heat pump type) or AUTO
mode
FAN,DEHUMIDIIFY or HEAT(electrical heat type)
mode
Install
Remove