AeroBed Premier IntelliWarmth Cover - Manual (Page 2)

English
1 2
English
Thank you for joining the Aero ® family by purchasing one of our upscale products.
You can expect topnotch quality, innovation and imagination from every Aero ®
product.
You are about to enjoy the luxuriously comfortable Aero ® Bed IntelliWarmth
comprising advanced, patented, FiberThermics ® technology with SMART microchip
control from ThermoSoft ® . Your AeroBed IntelliWarmth is made with soft, flexible
fiber heating elements that will provide many years of safe, comfortable use when
cared for properly. Please read these instructions carefully before using.
IMPORTANT: Preparation of your bed requires no tools. Use of tools may damage
your bed.
Read, follow and retain this instruction manual for future reference.
IMPORTANT SAFETY INFORMATION
AND WARNINGS
— WARNING: Adult supervision required for inflation, deflation and maintenance.
Follow all safety instructions to avoid serious injury.
— WARNING: This is an electrical product - not a toy. To avoid risk of fire, burns,
injury, and shock, it should not be played with or placed where small children can
reach it. Do not use in or around water.
— This is not a water toy. Use as a mattress only.
— This mattress is not intended for infants or persons with limited mobility. They may
roll off of the mattress and become entrapped between the mattress and a wall.
— Remove all sharp objects from area where bed will be set up and used. Bed may
puncture.
— Product is intended for household use only. Do not step or jump on bed or use as
a trampoline.
— Place bed in a safe area before use, making sure that there are no sharp edges,
steps, drops, or breakable items nearby. Use on flat surfaces only. Bed may tip
over on uneven surfaces.
— Do not use this bed on abrasive surfaces or near pointed/sharp items or surfaces.
Protruding objects may puncture the bed.
— This bed is made of plastic and therefore may melt or burn if it comes in contact
with any flame or heat source. Do not place it near or against heaters, open flame
or other hot objects.
— Do not use this mattress pad with an infant, a helpless person, or anyone
insensitive to heat such as a person with poor blood circulation.
— Do not tuck in the wired area of this mattress pad.
— Do not route electrical cords under the mattress or between mattress and box
spring. Do not allow the cords to be pinched.
!
!
— Keep the control away from an open window.
— Do not use pins. They may damage the electrical wiring.
— Be sure that this mattress pad is used on an alternating-current (AC) supply
circuit of the proper Voltage.
— Turn the controller switch to the “0” position when the mattress pad is not in actual
use.
— Excessive heating and irreparable damage may result from folding this mattress
pad when in actual use.
— Do not dry clean this mattress pad. Cleaning solvents may have a deteriorating
effect on the insulation of the heating element.
— Unplug product(s) when not in use.
— Do not attempt to dissemble, repair, or service the pump. No serviceable parts are
contained inside. Contact Aero Products International, Inc. at 1225 Karl Court,
Wauconda, IL 60084, for repair or servicing information.
INFLATION AND MATTRESS PAD INSTRUCTIONS
1. Remove your AeroBed ® and Intelliwarmth Mattress Pad from its lightweight duffle
bag. Keep bag for storage. NOTE: Bed must be at room temperature prior to
inflating or it may cause air leaks.
2. Remove AC plug, cord and comfort control wand from plastic bag and shrink
wrap. Because this is an electrical device, do not use this in or around water.
3. Plug pump into any standard polarized 110 Volt AC electrical outlet. North
American Electrical rating: 120VAC (NOTE: 230VAC product sold outside of
North America)
4. This product has a polarized attachment plug (one blade is
wider than the other) as a safety feature. This plug will fit
into a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not attempt
to defeat this safety feature.
5. Push and hold inflation button on the control wand for
approximately 60 seconds to inflate your AeroBed to the full
(firmest) capacity. Bed will not over-inflate.
6. Lie on the bed and use control wand to adjust the firmness to
your desired level. For firmer bed, press the inflate button. For
softer bed, press the adjust button.
3 minutes
ADJUST ADJUST
INF INFLLAATTEE
DEF DEFLLAATTEE
ADJUST
INFLATE
DEFLATE
ADJUST ADJUST
INF INFLLAATTEE
DEF DEFLLAATTEE
ADJUST
INFLATE
DEFLATE
ADJUST ADJUST
INF INFLLAATTEE
DEF DEFLLAATTEE
ADJUST
INFLATE
DEFLATE