Power Soak 35351 Skewer Soak INstallation Manual - Manual (Page 20)

16
Chemical Dispenser
A chemical dispenser is purchased separately from another manufacturer.
The installation instructions for the chemical dispenser will be provided by
the chemical dispenser manufacturer. The Skewer Soak is equipped with
holes in the backsplash for an electrical connection and tubing for a
chemical dispenser. The Skewer Soak also has an electrical cable for
operating the chemical dispenser.
The electric cable for operating the
chemical dispenser is a two wire cable
that will be bundled under the wash
tank. The wires must be connected to
a chemical dispenser or disconnected
from the electrical system of the
machine.
Chemical Sensor
mounting hole
Hole for electric cable
Holes for tubing
Electric cable
for signaling
the chemical
dispenser
THE ELECTRIC CABLE FOR THE CHEMICAL DISPENSER MUST BE CONNECTED TO A
CHEMICAL DISPENSER OR DISCONNECTED FROM THE SKEWER SOAK ELECTRICAL
SYSTEM.
IMPORTANT