Pulsafeeder Pulsar DLCM - Manual (Page 67)

61
10. If you want the PULSAR motor to stay on when a Drum Level is sensed, press [UP] to scroll to
{NO}.and press [ENTER].
LEVEL SWITCH
MOTOR OFF? NO
11. The display prompts you for the alarm relay status should the Drum Level Input trigger the alarm relay.
LEVEL SWITCH
ALARM RELAY? YES
Press [ENTER] if you want the Alarm Relay to activate with the Drum Level Input. The display
returns to the {–MENU– / LEVEL SWITCH} screen.
12. If you do not want the Alarm Relay to activate with the Level Switch Input, press [UP] to scroll to
{NO}.
LEVEL SWITCH
ALARM RELAY? NO
Press [ENTER] to accept the setting. The display returns to the {–MENU– / LEVEL SWITCH}
screen.